Hisense Aircon Error Codes Singapore (Complete Guide 2026)
Home – Services – Hisense Aircon Error Codes
Is your Hisense aircon showing an error code? These codes help identify problems inside your air conditioning system.
Understanding the error message helps you know whether it is a simple sensor issue or a serious inverter problem requiring professional repair.
This guide explains common Hisense aircon error codes, causes, solutions, and repair costs in Singapore.
How to Read Hisense Aircon Error Codes
Most Hisense aircon models display error codes through:
- Indoor unit LED display
- Remote controller screen
- LED blinking patterns (older models)
Hisense error codes are mainly divided into:
E Codes: Sensor and communication problems
F Codes: Inverter protection faults
How to Reset Hisense Aircon Error Code
Try a basic reset:
- Turn off the aircon power switch.
- Wait around 5 minutes.
- Turn the system back on.
If the error appears again, the problem usually requires inspection.
Common Hisense Aircon Error Codes
| Code | Meaning | Severity |
| E1 | Room temperature sensor fault | Medium |
| E2 | Indoor coil sensor fault | Medium |
| E3 | Outdoor coil sensor fault | Medium |
| E4 | Indoor-outdoor communication failure | High |
| E5 | Overcurrent protection | High |
| F1 | IPM overcurrent protection | High |
| F2 | Inverter module overheating | High |
Hisense Error Code E1: Room Temperature Sensor Fault
E1 means the indoor temperature sensor cannot read room temperature correctly.
Common Causes:
- Damaged sensor
- Loose connection
- Sensor circuit fault
Solution:
Sensor inspection and replacement may be required.
Hisense Error Code E2: Indoor Coil Sensor Problem
This error occurs when the indoor coil temperature sensor fails.
Possible issues:
- Poor cooling performance
- Coil freezing
- Incorrect temperature reading
Professional sensor replacement can solve the issue.
Hisense Error Code E3: Outdoor Sensor Fault
E3 indicates a problem with the outdoor coil temperature sensor.
It may affect:
- Cooling performance
- System protection
- Pressure control
Technician inspection is recommended.
Hisense Error Code E4: Communication Failure
E4 is one of the common Hisense aircon problems.
Possible causes:
- Damaged communication cable
- Loose wiring connection
- PCB communication failure
A technician should check wiring and control boards.
Hisense Error Code E5: Overcurrent Protection
E5 appears when the system detects excessive electrical current.
Possible reasons:
- Voltage problems
- Dirty outdoor coil
- Compressor stress
- Electrical fault
Avoid repeated resets if the error continues.
Hisense Error Code F1: IPM Overcurrent Protection
F1 indicates an inverter power module protection problem.
Possible causes:
- Compressor overload
- Inverter module fault
- Electrical issues
This requires professional diagnosis.
Hisense Error Code F2: Inverter Overheating
F2 means the inverter module temperature is too high.
Common causes:
- Dirty outdoor unit
- Poor airflow
- Inverter component problem
Cleaning the outdoor unit may help, but repeated errors need inspection.
Hisense Aircon Repair Cost Singapore
Typical repair costs:
| Repair Type | Estimated Cost |
| Diagnosis | Around $80 |
| Sensor Replacement | From $130 |
| Fan Motor Replacement | $200–$350 |
| PCB Repair | $250–$600 |
| Gas Top Up | $80–$200 |
| Pressure Test | Around $190 |
Final cost depends on the actual fault and replacement parts required.
Can You Fix Hisense Error Codes Yourself?
Safe checks you can do:
- Clean air filters
- Check outdoor unit blockage
- Restart the system
Avoid repairing:
- PCB problems
- Inverter faults
- Wiring issues
- Compressor problems
These require professional tools and experience.
Frequently Asked Questions
Why is my Hisense aircon showing E4?
E4 usually indicates communication problems between indoor and outdoor units.
Can I reset Hisense error codes?
Yes, you can try a power reset. If the code returns, the fault needs repair.
What does F1 mean on Hisense aircon?
F1 indicates inverter module overcurrent protection.
What causes F2 error in Hisense aircon?
F2 usually happens due to inverter overheating or poor outdoor airflow.
Why is my Hisense aircon blinking lights?
Older models may use LED blinking instead of displaying error codes.
Can I repair Hisense aircon myself?
Basic cleaning is safe, but electrical and inverter faults need a technician.
How much does Hisense aircon repair cost?
Repair costs depend on the problem, ranging from sensor replacement to PCB or compressor repair.
Do you repair Hisense aircon in Singapore?
Yes, professional Hisense aircon repair services are available for residential and commercial units.
Final Advice
Hisense error codes help identify aircon problems quickly.
For simple sensor issues, repairs are usually straightforward. However, inverter, PCB, and communication faults require proper diagnosis to prevent further damage.
If your Hisense aircon displays an error code, check the code carefully and arrange professional inspection for the correct solution.